How to Connect Acura ILX T-Style Android CarPlay Radio

How to Connect Acura ILX T-Style Android CarPlay Radio

This quick guide shows how to wire the  Acura ILX T-Style Android CarPlay Radio using the included adapter harness. No cutting or splicing—just match the OEM plugs to the labeled sockets.


 

What You Need

  • Plastic trim tool & Phillips screwdriver
  • Your Android head unit, adapter harness & CANBUS decoder (included)
  • Optional: electrical tape/zip ties for tidy cable management

Step 1 — Remove the OEM Head Unit

  1. Use a trim tool to lift the surrounding panels.
  2. Unscrew the OEM unit and pull it forward gently.
  3. Unplug the factory connectors from the back.

Step 2 — Match the Four Connectors

  • 1. Power & Speaker — main power/ground/speakers (largest plug).
  • 2. CANBUS (Protocol) — communication for steering wheel keys, climate data, factory amp.
  • 3. AUX Sound — OEM auxiliary audio input.
  • 4. Radio Antenna — FM/AM signal.

Step 3 — Plug Everything In

  1. Power & Speaker (1): OEM large plug → harness female → harness male → Android unit’s main power/speaker port.
  2. CANBUS (2): OEM plug → harness → CANBUS decoder box → Android unit CAN input.
  3. AUX Sound (3): OEM AUX plug → harness → Android unit AUX input (if used).
  4. Radio Antenna (4): OEM antenna → antenna adapter → Android unit antenna socket.

Step 4 — Test Before Reassembly

  • Unit powers on and plays audio from speakers
  • Steering-wheel buttons work
  • Radio receives stations clearly
  • AUX (if used) has sound
  • Reverse camera shows image (connect yellow RCA to CAM/REVERSE IN if equipped; reverse trigger via CAN or reverse light)

Step 5 — Reinstall & Enjoy

Secure the head unit, reinstall screws and trim, and you’re done.

Trouble shooting

if your oem screen not power off, please donot connect this 2 plugs

Order this kit: Acura ILX T-Style Android CarPlay Radio — plug-and-play harness and CANBUS decoder included.

Quick FAQ

Will climate/steering-wheel controls still work?
Yes—those signals run through the CANBUS decoder (Connector 2).

Do I need to cut any wires?
No. This is fully plug-and-play using the adapter harness.

Radio static?
Confirm the antenna (4) is fully seated in the adapter and the adapter in the head unit.


Need help? Message us on WhatsApp: +852 7048 2941.

Ähnliche Artikel

Hinterlasse einen Kommentar

Ihre E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.