Installation Guide: Nissan Maxima A35 (Base Trim) – Original-Style Screen Wiring

BASE TRIM · WIRING GUIDE

Nissan Murano Z51 & Maxima A35
Base Trim Wiring Connections

This wiring guide applies to the Nissan Murano Z51 Base Trim and Nissan Maxima A35 Base Trim. Complete all four connections below before powering on the Android screen.

Before installation: This guide covers the Base Trim wiring configuration only. If your vehicle has a different dashboard or factory audio configuration, confirm compatibility before connecting the harness.

Wiring Overview

The Base Trim installation uses four main connections: main power & speaker harness, AC panel harness, CAN protocol plug, and AUX audio.

Nissan Murano Z51 and Maxima A35 Base Trim Android screen wiring harness overview
1

Connect the Main Power & Speaker Harness

Connect the OE power & speaker adaptor to the corresponding factory connector.

Push the connector fully into position and confirm that the locking tab is engaged. This connection supplies the Android unit with its main power and audio signal path.

Nissan Murano Z51 Maxima A35 Base Trim main power and speaker harness connection
2

Connect the AC Panel Harness

Connect the OE AC adaptor between the vehicle's climate-control connection and the Android system.

This connection allows the Android screen to communicate with the vehicle's climate-control system and display the supported AC information.

Nissan Murano Z51 Maxima A35 Base Trim AC climate control harness connection
3

Connect the CAN Protocol Plug

Insert the OE CAN protocol plug into the matching CAN decoder harness.

The CAN connection allows the Android unit to communicate with supported vehicle functions such as steering-wheel controls and vehicle information.

Nissan Murano Z51 Maxima A35 Base Trim CANBUS protocol decoder connection
4

Connect the AUX Audio

On the Base Trim configuration, Android audio is routed through the vehicle's factory AUX input.

Connect the supplied AUX cable to the factory AUX connection and make sure both ends are fully seated.

No sound after installation? Check the AUX connection first. An incomplete AUX connection is one of the most common causes of Android audio with no sound output on the Base Trim setup.
Nissan Murano Z51 Maxima A35 Base Trim AUX audio cable connection

✓ Wiring Complete — Test Before Final Assembly

Once all four connections are secured, power on the vehicle and verify the system before reinstalling all dashboard trim.

✓ Android unit powers on
✓ Speaker audio works
✓ AC information displays
✓ Steering-wheel controls respond
This Base Trim wiring guide applies to:
  • Nissan Murano Z51 — Base Trim
  • Nissan Maxima A35 — Base Trim

Back to Installation Overview →

Zurück zum Blog

Hinterlasse einen Kommentar