DENZA B5 / Fang Cheng Bao Leopard 5 Passenger Screen Installation
Step-by-step installation reference for the Roadnavier passenger-side Android entertainment display.
Before Installation
This guide applies to the Roadnavier passenger-screen kit designed for DENZA B5 / Fang Cheng Bao Leopard 5. Vehicle configuration may vary by market and production batch.
Before installation, confirm the vehicle model, steering position, dashboard configuration and supplied wiring kit.
Roadnavier 12.3" Passenger Screen for DENZA B5 / Leopard 5
Dedicated passenger-side Android display designed for the DENZA B5 / Fang Cheng Bao Leopard 5 dashboard.
Installation Process
Use suitable automotive trim tools and complete each step carefully. Do not force dashboard panels, connectors or mounting components.
Remove the Upper Dashboard Trim
Use a suitable nylon trim-removal tool to carefully release the upper dashboard trim behind the factory center display.
Work gradually around the retaining clips to reduce the risk of scratching or damaging the interior trim.
Prepare the Passenger-Side Mounting Area
Remove the required factory fixing screws and prepare the passenger-side mounting position.
The Roadnavier display uses dedicated mounting hardware and is installed separately from the original center screen.
Independent Passenger Display Architecture
The Roadnavier passenger display is designed as an additional Android screen rather than a replacement for the factory center infotainment display. Always use the supplied wiring configuration and verify vehicle functions after installation.
Route the Power Harness
Route the supplied power harness through the dashboard toward the vehicle fuse-box area.
Keep the harness secured and away from moving components, sharp edges and factory safety components.
If the installer is uncertain about the correct circuit, verify the power source before connecting the screen.
Test Before Reassembly
- Passenger screen powers on normally
- Touchscreen and Android interface respond correctly
- Wi-Fi and Bluetooth functions operate normally
- Factory center display continues to operate correctly
- All connectors are fully seated
- Harness routing does not interfere with dashboard trim
Installation Troubleshooting
Complete these basic checks before requesting technical support.
Screen Does Not Power On
Check the power source, fuse position and harness connections. Confirm all connectors are fully seated.
Screen Restarts or Loses Power
Verify that the selected power circuit provides stable voltage and recheck the harness connections.
Dashboard Trim Does Not Fit
Do not force the trim into place. Recheck the mounting position, cable routing and retaining clips.
Need the Screen or Installation Support?
Check product specifications and compatibility before ordering. For installation support, send us your vehicle model, production year, dashboard photo and clear photos or video of the wiring connection.