Step-by-Step Wiring (Base Trim)
📌 This guide focuses only on wiring connections. Please follow carefully to avoid “no power / no sound / no climate display” issues.
1. Connect the Main Power & Speaker Harness
-
Plug the OE power & speaker adaptor into the factory connector.
-
Make sure the connection is firm—this supplies both power and speaker signals.
2. Connect the AC Panel Harness
-
Use the OE AC adaptor to connect the climate control panel to the new screen.
-
This ensures all AC and climate control functions are displayed on the Android unit.
3. Connect the CAN Protocol Plug
-
Insert the OE CAN protocol plug into the decoder harness.
-
This enables steering wheel buttons and communication with the vehicle’s system.
4. Connect the AUX Audio
-
For Base Trim, audio is routed through AUX.
-
Plug the AUX cable into the factory AUX port.
-
⚠️ Double check the output connection—otherwise there will be no sound.
✅ Wiring Complete
Once these four connections are secured, your unit is ready for CANBUS setup and testing. Proceed to power on and verify all functions before final assembly.