Installation Guide of Navitech Acura TL Tesla screen

General Installation Guide:

1. Preparation: Gather tools (screwdrivers, trim removal tools), disconnect the car battery, and park in a well-lit area.
2. Disassemble Dashboard: Consult your Acura TL's service manual or online resources for specific steps on removing the trim pieces and factory radio around the dashboard.
3. Wire Harness Connection: Identify the wire harness adapters included with your MY Android screen. These will connect the new screen to your Acura's electrical system. Double-check for color-coded matches.
4. Android Screen Installation: Secure the MY Android screen into the dashboard using the provided mounting bracket and screws.
5. Reassemble Dashboard: Carefully put back the trim pieces you removed in step 2.
6. Power Up and Test: Reconnect the car battery and turn on the vehicle. Test the functionality of the MY Android screen, including touchscreen, audio, and any additional features.

Resources:

• Online Video Guides: Search " Acura TL Android Screen Installation" on YouTube. Look for videos specific to your car's model year for a visual reference.
• Car Forums: Acurazine forums have threads dedicated to aftermarket radio installations. 
• MY Customer Support: If you purchased your MY Android screen directly from MY shopify, contact us for customer support for model-specific installation guidance.

Important Safety Note:

If you're uncomfortable with car disassembly or electrical wiring, consider consulting a professional car audio installer to ensure a safe and proper installation.

Installation Guide for you:

1.Conncet the plugs of android headunit by this guide:

2.A full Guide of Wireharness for both 2004-2006 and 2007-2008; we have combine both type wireness to one set wireharenss

3.If your car is Acura TL 2004-2006, please read this further

4.If your car is Acura TL 2007-2008, please read this further

Most important, please pay attention the blue plug, you need chip some to make them fit.

5.Navitech Acura TL Rearview Camera Connection

USB connection

Wireless Carplay Connection

If there is noise , please buy a noise filter , and connect to the wireharenss

4G sim Card slot 

After you install the rear camera, if the video shows black and grey color

Please set from here: