The eighth-generation Honda Accord CU2 (2009–2014) is a premium mid-size car built for Japanese and European markets. Our 10.25-inch Android upgrade modernises your cockpit completely — while retaining every essential factory function you rely on daily.
Factory vs Upgraded — Side by Side
Factory Dashboard
Roadnavier Android Upgrade
Key Compatibility Check
- Factory navigation & settings retained? Yes — you can still change clock time and access all vehicle settings without any workaround.
- Factory radio menus still work? Yes — simply press the AUX button to switch between factory and Android menus.
- Facia / mounting kit included? Yes — all necessary fitting kits are included in the box. No separate purchase required.
- Fits Accord Euro CU2 chassis? Yes — perfectly compatible with the CU2 chassis across all trim levels.
Installation Guide
Follow the steps below. If you prefer a visual walkthrough, the wiring diagrams are included further down.
Remove the Factory Head Unit
Use a trim removal tool to carefully pry off the centre console surround. Remove the factory screws securing the head unit and slide it out. Disconnect all factory connectors and set the original unit aside safely.
Connect the Wiring Harness
Connect the included wiring harness adapter to the vehicle's factory connector. Match colours carefully. Refer to the RCA layout diagram below for sub-woofer and amplifier connections if applicable to your trim.
Connect the Steering Wheel Control Adapter
This is a critical step — do not skip it. Securely plug in the steering wheel control adapter to retain full steering wheel button functionality. See the highlighted section below for the exact connector location.
Fit the New Unit and Test
Slide the Roadnavier unit into the dash cavity. Before securing, power on and test: screen display, steering wheel controls, reverse camera (if fitted), and audio output. Confirm everything works before bolting down.
Secure and Reassemble
Secure the unit with the included mounting screws. Press the facia trim back into position until all clips engage. Power cycle the vehicle and run a final check on all functions.
Wiring & Installation Photos
Wireharness & RCA Layout
Ensure this adapter is securely connected before completing the install. Without it, all steering wheel controls will be non-functional.
Frequently Asked Questions
Modernise Your Honda Accord Today
Full kit included. Plug-and-play install. Ships globally.
Shop Now →Need help? Contact us directly for technical assistance.