Transform your 1st Gen Acura TSX (2004–2008 CL9 / Honda Accord Euro) interior with an OEM-spec Android infotainment system. Engineered with an On-Board Motherboard CAN-Bus Processor, this unit delivers seamless Wireless Apple CarPlay, Wireless Android Auto, and complete factory system retention—zero harness cutting, zero loose decoder rattles, and zero battery drain issues.
Why Roadnavier is Engineered Better
⚡ Integrated PCB CAN-BusHard-wired directly onto the motherboard. Eliminates loose external boxes that rattle and overheat behind the dashboard.
❄️ Dual-Zone HVAC RetentionTranslates native Acura multiplex data to keep temperature, fan speed, and vent readouts active on the upper screen.
🎵 ELS Premium Sound SupportMatched low-level differential signal routing eliminates alternator whine and activates the trunk amplifier seamlessly.
📱 Wireless CarPlay & Android AutoHardware-integrated modules deliver fast automatic Bluetooth/Wi-Fi pairing upon turning the ignition key.
Built-in DSP (Digital Sound Processor) with 32-Band Equalizer
Steering Wheel Controls
100% Retained via Native CANBUS Decoding
Camera Inputs
Supports OEM Backup Camera & Aftermarket AHD 1080P Rear/Front Cameras
📦 Complete Plug-and-Play Kit Includes:
1x Roadnavier Acura TSX Dedicated HD Android Screen Assembly
1x Custom Vehicle-Specific ISO Wiring T-Harness (Built-In CAN-Bus)
1x External High-Gain GPS Antenna Module
2x USB Extension Cables (Glove Box Passthrough)
1x RCA Harness (Subwoofer Output, Video IN/OUT)
1x Rearview Camera Input Cable
🔧
DIY Installation & Wiring Manual
Worried about installing it yourself? We provide complete technical documentation covering dash disassembly, CANBUS protocol binding, and factory amplifier trigger setup.
No. The stock Acura HandsFreeLink (HFL) Bluetooth module is notorious for failing and draining battery current. Installing this unit allows you to safely disconnect the old HFL module while enjoying modernized, zero-drain Bluetooth and CarPlay connectivity.
Will my factory steering wheel controls still work?▼
Yes. Volume Up/Down, Track Seek, and Mode buttons are decoded directly by our motherboard-integrated CAN-Bus processor and remain 100% functional.
What if I get no sound after installation?▼
No sound usually indicates that the OEM amplifier remote trigger wire (+12V AMP-CTRL) needs to be activated. Refer to our included installation guide for quick 1-minute troubleshooting steps.