Installation Guide – Range Rover L322 (2002–2012) 10.25″ Android Head Unit
This guide will walk you through installing the 10.25″ Android Head Unit for Range Rover L322 (2002–2012). Follow each step carefully to ensure a safe installation and optimal performance.
📦 What's in the Box
- 10.25″ Android Head Unit
- Wiring Harness
- CAN-Bus Decoder Box
- GPS Antenna
- USB Extension Cables
- Mounting Screws & Brackets
🛠 Preparation
- Disconnect the negative terminal of the car battery to prevent short circuits or airbag warnings.
- Gather tools: plastic trim removal tools, screwdrivers, and a soft cloth to protect dashboard surfaces.
- Review the included wiring diagram before starting.
📍 Step-by-Step Installation
- Remove Original Trim & Head Unit Use the trim removal tool to gently pry off the dashboard panel. Unscrew and slide out the OEM head unit, keeping all screws and clips safe.
- Connect Wiring Harness & CAN-Bus Decoder Plug the provided harness into the factory connector. Attach the CAN-Bus box securely behind the dash.
- Install Optional Accessories Connect GPS antenna, USB cables, reverse camera, and microphone if needed. Route cables neatly to avoid pinching or interference.
- Mount the New Android Unit Slide the head unit into place, align with mounting points, and secure with screws.
- Testing Reconnect the battery, power on the unit, and test: Touch screen, CarPlay/Android Auto, GPS navigation, Bluetooth, audio output.
- Reassemble Dashboard Once all functions work, reattach trim panels and check that all clips are secure.
⚠ Compatibility Notes
- Not compatible if your dashboard has an OEM DVD loader in the top slot.
- If there is no sound after installation, check DSP/AMP settings in the system menu or use an I-Bus app to activate the OEM amplifier.
📸 Installation Reference
(Replace these with actual images)
For more details or to purchase, visit the product page here.
